We Service All Boilers Including
0% Boiler Finance Available, Buy Now Pay Later Click Here For More Information
TM Hughes & Son have been servicing Boilers in Chelmsford for over 30 years.
Your Boiler works hard every day to supply your family with heating and hot water.
An annual Boiler Service will ensure your boiler runs efficiently.
Minimising the risk of failure. Boiler breakdowns are at best inconvenient and, at worst, very unpleasant.
It’s not fun having no heating and hot water in freezing conditions.
A once a year Boiler service will prevent this. Our fully qualified engineers are on hand to service your boiler.
While they’re servicing your boiler, we can also identify any issues before they turn into expensive problems.
Annual Boiler servicing validates your home insurance for boiler breakdowns.
Your insurance may not cover you in the event of a boiler breakdown if you haven’t had a service in the previous 12 months.
Boiler servicing also protects your family from carbon monoxide poisoning. Your Boiler and heating system will always run better after a good service.
Making sure you get the best possible heat output and value for money from your energy budget.
When you book one of our engineers, you will always receive a friendly and professional service.
All our work’s done to a high standard. TM Hughes & Son are Worcester Bosch Accredited Gas Engineers.
0% Finance is available for Boilers and Repairs. Click Here for more information
The Boiler Service
When one of our heating engineers visits your Chelmsford home, they will turn up at the agreed time. Engineers will show you their Gas Safe Registered ID card before starting work. We follow a strict procedure when it comes to servicing Boilers.
The Boiler case’s removed from the boiler and checked for signs of leaks or corrosion. Sometimes the boiler case can corrode due to leaking water and condensation. In the event of a corroded casing, we will always attempt to source a new case. Leaks in boilers are usually down to old corroded seals or failed pressure valves. (often caused by too much pressure in the system). We carry many parts in stock to change a seal or valve if a leak is present. We will also check all pipework to ensure no leaks are present.
2, Every boiler seal’s checked to ensure they are tight.
3, Waterflow’s checked to ensure your boiler is running at the correct pressure. Sometimes blockages in the system can restrict water. This can cause your boiler to switch off repeatedly.
4, The Boiler and components are thoroughly cleaned. Cleaning helps your boiler run smoother. Allowing us to perform the required tests accurately.
5, Gas burner pressure’s checked. If the burner pressure is incorrect, it’s adjusted as required.
A gas rate check’s conducted using a gas meter. The gas rate checks determine whether your boiler is burning the correct amount of gas per hour.
6, A flue gas analysis check’s run. The flue gas analyser’s placed in the flue, measuring the amount of oxygen, carbon dioxide and carbon monoxide. The flue gas analysis will determine that your boiler’s safe and efficient.
7, Ventilation’s checked. Ventilation is important for boilers to work properly for every cubic meter of gas 10 meters of cubic air’s required for complete combustion. Proper ventilation prevents carbon monoxide poisoning. Our engineers will ensure your ventilation is adequate.
8, The Boiler Flue’s checked. The Boiler Flue allows all exhaust gases from your boiler to escape outside. Improperly set flues can enable household heat to escape as well. Unnecessary and a waste of money. We will ensure your flue is in good working order. Expelling all noxious gases while retaining valuable heat.
9, All Boiler safety devices checked to ensure they work. Your boiler has safety devices built in, such as safety and relief valves. These are all checked to prevent any potential boiler damage in the event of failure.
10, The Boiler and pipework are checked for leaking gas. Leaking gas can be fatal. But don’t worry, everything’s checked to ensure there’s no leaking gas from your boiler or pipes.
11, Once the service is complete, your boiler’s switched on. Our engineers will check that all your radiators are heating up. If your radiators are not getting hot at the top, you may have too much air in the system. We can bleed your radiators if necessary. Sometimes radiators have a build-up of sludge and debris. Preventing radiators from getting hot in the middle and bottom. We may recommend a power flush if we find this is the case.
12, We will check your outdoor pipes and make sure they’re not prone to freezing. In winter, frozen water expands and may split uninsulated pipes—a common cause of boiler breakdown. We will make recommendations on any pipes that are not lagged and could freeze.
13, A service record’s written for you. The record will prove your boiler and system’s serviced in a satisfactory condition.
Types Of Boiler We Service
We service all Combi, System and Regular Boilers. Gas boilers are the most common in Chelmsford. We service all boilers of other fuel types, including LPG, Oil and Electricity.
Makes Of Boiler We Service
We service all boiler makes, which include
We also service boilers in Basildon, Billericay, Brentwood, Maldon, Southend and all surrounding towns and villages.
If you would like a quote or book a Boiler Service, please contact us using the phone number or contact form below.
Hi, I’m Terry the founder and owner of TM Hughes & Son Gas Services
Please get in touch using the Phone Numbers or Contact Form below
Call – 01245 830075
0% Finance
For Boiler Installations & Repair