Gas Fire Service Rayleigh

Ensure your Gas fire is running safely and efficiently with annual servicing.

TM Hughes & Son service Gas Fires in and around Rayleigh with a team of Gas Safe Registered Engineers who can service any type and make of gas fire.

The procedure for servicing includes a thorough cleaning of all fire components, safety checks, and testing.

After servicing, you’re fires clean and will run smoothly, burning the correct amount of gas. You will rest assured your fire’s safe and not a carbon monoxide risk.

Gas fires should be serviced every year. The winter is a good time just before the fire goes on as your fire will run better and safely throughout the colder months.

Don’t use your fire if it’s become difficult to light, is smokey or leaving soot signs. A gas engineer must check it to verify safety as it may be a carbon monoxide risk.

The Gas Fire Service Includes

Complete cleaning of the fire and all working parts to ensure the best possible energy efficiency (possible for the make and condition of your fire)
Testing of burn rate to ensure the correct amount of gas is consumed
Testing of all safety devices to ensure correct function and user safety
Testing of flues and chimneys to ensure correct expulsion of exhaust gasses

Gas Fire Service Benefits

Smooth running
Improved energy efficiency
Fuel bill savings
Assured safety
Validation of home emergency cover and fire warranty*

(* Home emergency policies and fire warranties usually stipulate the fire must be serviced every 12 months by a gas safe registered engineer)

All Types OF Fire Serviced

We service all types of Gas Fire which includes

Standard Open Fronted Gas Fires
High-Efficiency Gas Fires
Outset Gas Fires
Brick Chimney/Class One Flue
Pre-Fabricated Flue
Pre-Cast Flue

The Service Procedure

Here’s what a typical gas fire service looks like

Call or email us to book a gas fire service at a convenient time and date
A gas safe registered engineer will turn up at the agreed time and present their gas safe id
Dust sheets are laid on the floor around the fire area to ensure your carpet/flooring remains clean
The gas supply is switched off
The engineer dismantles the fire to reach the internal parts
All internal parts are thoroughly cleaned
The fire’s reassembled
The gas supply is switched back on
The gas pressure and burn rate is tested and adjusted if necessary
The flue or chimney is tested to ensure exhaust gasses are expelled at the correct rate
The fire’s tested to ensure there’s no leaking gas
Your carbon monoxide alarms tested*
The engineer writes and presents a service record
The engineer tidies the work area, takes your payment and leaves

(* you should have a carbon monoxide alarm in the same room as your fire if one isn’t present, our engineer will recommend an alarm)

Please note we only service gas Fires. We don’t undertake repairs.