Boiler Service & Repair Grays

Call – 01375 726 075

Email Us Or Request A Call-Back

We Service & Repair All Types & Makes Of Boilers Including

0% Boiler Finance Available Click Here For More Information

Welcome to TM Hughes & Son Gas Services Ltd. We Service and Repair Boilers in Grays and the surrounding areas.

All types of Boilers serviced
Gas Safe Registered
24/7 Availability for repairs with no call-out charges

Boiler Servicing

Your Boiler provides warmth, hot water and peace of mind. You and your family will be comfortable during the colder months. Annual servicing ensures the prolonged life of your Boiler, efficiency, and, most importantly, safety.

Lifespan Enhancement

Just like any appliance, a Boiler’s performance deteriorates over time. Annual servicing ensures its parts are clean and in good condition, increasing its longevity and saving costs in the long run.

Energy Efficiency And Cost-Saving

A well-maintained boiler operates at its optimum, consuming less energy. This not only reduces your carbon footprint but also cuts down energy bills.

Safety Concerns

Boilers, if unchecked, can be hazards. Leaks, faulty parts, or improper combustion can lead to Boiler damage, and even carbon monoxide releases a silent, odourless, yet deadly gas. Regular servicing ensures your Boilers are safe and any issues can be dealt with.

Boiler Service Breakdown

Here’s a typical procedure undertaken during a Boiler service:

Inspection And Addressing Leaks

The Boiler casing is removed and inspected for corrosion, which can indicate leaks.
If leaks are found, their origins are determined. Seals or pressure valves might be replaced if they’re the cause.
Corroded cases are repaired or replaced if necessary.

Pipework And Seals

All pipework is thoroughly inspected for leaks.
Seals are checked for tightness and corrosion. Necessary replacements are made.
Water flow pressures are adjusted if necessary, ensuring no system blockages.

Safety Checks

All safety devices are inspected to ensure they work correctly, safeguarding against potential Boiler damages in the event of an issue.

Internal Cleaning And Component Checks

Boiler components are cleaned for smoother operation.
Gas burner pressures are adjusted as needed, followed by a Gas Rate Check using a meter.

Gas And Flue Analyses

A Flue Gas Analyser measures oxygen, carbon monoxide, and dioxide rates.
The flue, which expels exhaust gases and condensation, is checked for efficiency and safety.
Ventilation checks ensure adequate air for the gas, maintaining an optimal balance.

Operational Testing And Radiator Inspection

The Boiler is activated to check for gas or water leaks and ensure it runs smoothly.
The casing is cleaned and restored.
Radiators are inspected for heat distribution, with air bled as required. The presence of ‘sludge’ might prompt a Powerflush recommendation.

External Pipe Check

Exterior pipes are inspected for proper insulation to prevent freezing and potential breakdowns.

Service Documentation

A detailed service record is written to verify the Boiler has been serviced by a certified Engineer.

Boiler Repairs

We repair all types of Boilers, including Combination, System, Regular/Heat-Only, Gas, LPG and Electric. We are available 24 hours a day, and our repair services include no call-out charges.

Boiler Faults That Require Attention

We have seen and solved every type of Boiler fault over the years. Here are some typical faults:

Boiler Keeps Switching Off

Pressure Issues: Often, a quick repressurisation might do the trick. If the pressure continues to drop, there’s another issue.
Leaks: Worn-out pump seals or a faulty pressure valve can cause leaks. Seals and valves are typically straightforward to replace.
Blockages: A blockage can lead to low water pressure. If suspected, an engineer will locate and remove the obstruction.
Faulty Pumps: A malfunctioning pump can cause the Boiler to switch off. It should be inspected, repaired, or replaced.

Faulty Heat Exchanger

Often caused by blockages from limescale or debris from pipes or radiators. This can cause the exchanger to overheat, emit loud noises, and eventually fail. Loud noises are always a red flag. Replacement or cleansing of the heat exchanger may be necessary.

Faulty Thermocouple

This component regulates the gas flow. If it malfunctions, the pilot light might go out, disabling the Boiler. Often, replacing the thermocouple can remedy the issue. If this doesn’t solve the problem, inspect the gas supply.

Faulty Thermostats

An inaccurate or malfunctioning thermostat can disrupt the Boiler’s operation, so a straightforward replacement is in order.

Frozen Condensate Pipes

The condensate pipe expels wastewater outside. If not insulated, it might freeze during colder months. If frozen, the pipe needs thawing to resume the Boiler’s normal operation. Also, proper insulation is required to prevent the issue from occurring again.

Radiators Not Getting Hot

If radiators remain cold, it might be due to air accumulation. Bleeding them is the first thing to try.

If the radiators are only hot at the top or middle and top, there might be sludge in the system. This requires a power flush to remove.

Boiler Service & Repair FAQs

What is the lifespan of a typical Boiler?

On average, a boiler can last between 10 to 15 years. However, with annual servicing, its lifespan can be extended.

How often should I get my Boiler serviced?

For optimal performance and safety and to ensure your Boiler warranty remains valid, it’s advisable to get your Boiler serviced annually.

What signs indicate that my Boiler needs repair?

Unusual noises, water leaks, reduced heating efficiency, or frequent shutdowns are telltale signs. Never ignore Boiler trouble, as issues can worsen over time and lead to more costly repairs.

Are there any Boiler maintenance tips for homeowners?

Ensure clear space around the Boiler, check for leaks and any visible damages regularly, ensure the condensate pipe is insulated and get your Boiler serviced annually.