Having warned us that the part would have to be ordered with a possible one to two days turn around he left to order a new seal from a local supplier. However, despite his doubts on the availability he managed to locate and obtain a replacement part and returned the same day to carry out the repair. Having done so, he went on to successfully complete the annual boiler service as required. Kai’s efforts and prompt repair ensured that we suffered little to no inconvenience. This is not the first time that TM Hughes & Son Gas Services has come to our rescue and I would have no hesitation in highly recommending this company to anyone. GF
Very polite
Good clean work
Will definitely use these guys again.
TM Hughes & Son installs Gas cookers in Hockley and the surrounding areas. We disconnect old gas cookers also.
We are a friendly family run business with Gas Safe Registered engineers and over 30+ years in business.
Gas cookers have retained their popularity over electric ovens in many kitchens across the county. Many prefer the heat accuracy and energy efficiency gas offers.
A qualified Gas Safe Registered engineer must always install gas Cookers.
The law requires all gas appliances to be fitted by a qualified engineer as gas leaks are a possible consequence of improper fitting and can be fatal.
Gas Cooker warranties require correct fitting by a Gas Safe Registered engineer for validation.
Don’t risk it. Let us install your new Gas Cooker properly, safely and legally.
Our engineers are swift and friendly, and our prices are very reasonable.
We install all types of Gas Cookers & Hobs, which include
- Gas Cookers
- LPG Gas Cookers
- Gas Range Cookers
- Built-In Gas Ovens
- Dual Fuel Cookers
- Gas Hobs
- Built-In Gas Hobs
The Gas Cooker Installation Procedure
If you need a new Gas Cooker installed and/or an old cooker disconnected, contact us with your details, and we’ll provide a quote. If you’re happy with the price, book a convenient time and date for an engineer to visit.
The engineer will arrive on the day at your booked time and present their Gas Safe Id.
First, your old cooker’s disconnected from the gas supply and removed.
Before installing your new cooker takes place, the engineer will carefully examine the area around the cooker.
An area above (750mm) and to the sides (50mm) of the cooker must be clear from combustible materials such as kitchen units, sockets, switches, shelves, cables etc. This area is known as ‘The Hot Zone’.
The engineer will also inspect the gas connection to verify it’s suitable for your new cooker. If not, then a new connection can be fitted.
If everything’s good in the Hot Zone, the engineer will unpack and connect your new cooker to the gas supply. Afterwards, the gas supply is switched on and checked to ensure no leaking gas.
After installation, your new cooker is switched on and tested per the cooker manufacturer’s instructions to ensure everything works as it should.
An appliance installation record’s written for you to keep for your records.
Hi, I’m Terry, the founder and owner of TM Hughes & Son Gas Services
Please get in touch to book an appointment or receive a free, no-obligation quote
Call – 01702 910075
Email – info@tmhughesandson.uk
0% Finance
For Boiler Installations & Repair