Gas Cooker Fitting & Disconnection
Maldon & Surrounding Areas
Call – 01621 880075
Use our Gas Safe Registered engineers for a swift Gas Cooker installation. Working with gas is not something any homeowner, landlord or tenant should attempt on their own, gas appliances must be fitted by experienced and certified engineers.
We have been fitting gas cookers in the Maldon area for over thirty years. We can install any type and make of Gas Cooker which includes
- Gas Cookers
- LPG Gas Cookers
- Gas Range Cookers
- Built-In Gas Ovens
- Dual Fuel Cookers
- Gas Hobs
- Built-In Gas Hobs
Gas cookers provide even and accurate heat and still work in the event of power cuts. Gas is a cleaner, and cheaper fuel than electricity, therefore, better for the environment.
Why Use TM Hughes?
- Gas Safe Registered Engineers
- A reputable local company
- 30+ years of experience
- Both installation & disconnection available
- Fair prices
- Certification issued after installation
How Does An Installation Work?
The first step is to book a time to undertake the disconnection or installation (or both). Give us a call, let us know your requirements, and we’ll give you a price. Prices vary on the work that needs doing this way. We can provide the best possible prices.
The engineer will arrive at the agreed time before the installation begins the safety check of the area is undertaken.
Hobs need clearance so the heat doesn’t melt or cause anything to combust—750mm’s required above the hob and at least 50mm each side of the hob.
Nothing flammable can be in this area which must be clear of sockets, shelves, kitchen units, other appliances, electrical cable and combustible wall coverings such as wallpaper or wood panelling. The areas thoroughly analysed, if your area doesn’t meet the requirements adjustments will have to be made to make the installation safe and legal.
Gas cookers need to be close to the gas line (within 1.5 meters), and the gas connection will need to be in good order. The distance and connections checked for suitability. Adjustments can be made if necessary.
Once the engineers satisfied the cooker areas suitable, the gas supply is switched off so the installation can commence. The old cookers pulled out and disconnected from the gas line.
Your new cookers unpacked (if required) and put into place—the cookers connected to the gas line the connections checked for tightness. The gas supply is switched on.
The connections checked for gas leaks before your new cookers switched on and tested. We check everything working, as stated by the manufacturer’s instructions.
Finally, gas installation certificates are written. Keep this certificate to validate the manufacturer’s warranty and any home breakdown cover you may have (both usually stipulate the cooker must be fitted by a Gas Safe Registered Engineer)
To book an installation or disconnection, please use the phone number or contact form below.